Showing posts with label project. Show all posts
Showing posts with label project. Show all posts

Wednesday, June 4, 2014

How to Put a Cork in it: DIY Necklace

It's Summer.  I'm 2 days into break and am already blitzing through projects that have been on my list for at least a year.

Here's one that's been on the bottom of my list for far too long: make a necklace using these corks.
I love the texture, so when I found them in a vintage science kit, I grabbed them up.

  



I proceeded to neglect the corks for about 2 years, until last night.  I was itching to do something creative and my other projects (mostly things involving paint) need time to cure.  In an effort to cultivate patience I set up to make a necklace instead. 

First I found my sewing kit.  It was a present from Erin, who owns Yellow Bird Gifts.  Check her out! 

    


I also located 2 pieces of felt from a failed felt Peter Pan collar necklace that I attempted to make a little bit ago.  I laid out the corks on the fabric to see if it could work.  And it did!  
Waste not; want not.   

 

I used a safety pin to poke holes in each cork.  You could do this with a needle to save some steps, but I didn't want to risk bending a sewing needle.  


Then because the corks have a rustic texture, I marked each hole with straight pins so I wouldn't lose all of the holes I'd made.  I thought they looked pretty.


Because they do.

Then came the not so pretty part. I sewed the corks to the felt in the arrangement I'd planned.  I used upholstery thread because it was the closest color to that of the cork that I had.  I stitched as much behind the corks as possible, because I didn't want them to be very visible. 

This led to and irregular stitches and a very messy look. 


After stitching and securing each cork, I tacked on ribbon on the ends.  I could have also attached a chain, but I wanted to keep the media down to wood and cloth.


The good thing about a failed Peter Pan collar is that there are two pieces that failed and are identical.
I stitched the second piece over the foundation felt to help the necklace look more polished.






Polished is a relative term, I know because I'm clearly wearing corks.    But it works! 


Saturday, May 24, 2014

Everything Falls in the Toilet: a Weekend Project & Solution

I have a bathroom problem.
There is terrible little space.
The area between sink, toilet, medicine cabinet, and radiator is minimal.  Inches.
And my habits in getting ready in the morning render opening the medicine cabinet difficult.
See?

On multiple occasions I have dropped important things in the toilet.
My toothbrush, for instance.
The replacement toothbrush, for another.

Understandably, I dislike fishing things out, which means I needed to come up with a way to contain makeup and toiletries that isn't on a very narrow ledge.

And here my solution has been staring at me for months.

Enter tea canisters.  
I love these tins, and in fact I love all boxes, so I greatly increased my tea intake to warrant purchasing more.
Bravo tea company, you got me.

Now I thought on my problem this morning and realized have many many empty tins (about 8).
I imagined a few different ways to suspend, elevate, the tins this morning.  One thought involved tension rods (it didn't go well on the test run) another 3M hooks.  

Apartment living, and trying to do no harm to keep your security deposit sure does help 3M doesn't it? Remind me to get their prospectus this summer to check stock options. 
I decided some discrete tea cup hooks would work best.  The holes (if properly placed) won't show up in an inspection. 

One of the good things about me being me is, I had everything I needed already:
An imagination.
A surplus of tins.
Hooks.
Nails.
A Hammer.

Do you have those?  Good... let's get started.



First I drove a nail through each tin.  I poked about 3 holes per tin and you will need the metal to be up against a hard surface, if it isn't the sides will dent.  I decided to nail it on the back porch to utilize the crack in the boards.
The hole (if you are poking out) will make the metal around the hole sharp.  File it down if you have kids or are prone to accidents. 

Then I drove a nail in the medicine cabinet shelf to make twisting the hook relatively simple.  Depending on the wood, you may need to use pliers.  
Make sure that the hook will clear the wall when twisting before starting the hole.  It may seem like I am talking down to you, but even if your spacial skills are keen pretend to rotate the hook first, then start the hole.  Trust me. 




If you've made the hole in the tin 1.) large enough and 2.) close enough to the top to accommodate the hook, you're in business.  Everything is smooth sailing from here on.


Repeat.
Repeat.
Repeat.


And 25 minutes later, if you got distracted by texts, making coffee, or misplacing your hammer multiple times (it happens) you should be done.


I gave this a vote of confidence and then stood on the toilet to show you how logistically this is a difficult bathroom setup.


I can open my cabinet now!



Harney & Sons, you have been instrumental in helping me get organized and stay sanitary.
I salute you.